3D PVC Panel Dome Wooden W1 Mirror

3D PVC Panel Dome Wooden W1 Mirror is an interior-grade decorative panel for residential and commercial walls and ceilings.

Product specifications

• Price: Per panel, including GST and standard shipping
• Minimum order: 10 panels
• Factory packing: 50 panels per box
• Product type: 3D PVC mirror panel
• Base material: PVC
• Mirror surface: Acrylic-based mirror finish
• Panel size: 50 × 50 cm
• Coverage: 0.25 m² (approximately 2.69 sq ft) per panel
• Base sheet thickness: 1 mm
• Embossed depth: Varies by design
• Approximate net weight: 300 g per panel
• Application: Interior walls and ceilings
• Cleaning: Soft dry cloth only

Installation and surface preparation

Install on a clean, dry, stable and properly finished surface. The surface should have cured wall putty and primer and must be free from dust, moisture, oil, loose paint and flaking material.

Adhesive is not included and must be purchased separately. Fevicol SR 505 or a compatible nail-free/high-grab adhesive is commonly used. Follow the adhesive manufacturer’s instructions and test a small area before complete installation. Adhesive consumption is not specified because it varies by surface and application method.

Panels can be cut using a hard paper cutter or light saw with appropriate safety precautions. For ceiling installation, professional application and temporary support during adhesive setting are recommended. Home Sajawat does not provide installation service.

Use and care

This is an interior-grade product. It is not recommended for exterior locations, wet areas, direct water exposure or outdoor weather conditions. Clean only with a soft dry cloth.

No fire-retardant or heat-resistance certification is claimed. No separate commercial product warranty is provided.

Dispatch, colour and damage information

Orders are normally dispatched within 24–48 working hours. Delivery time after dispatch depends on the destination.

Product colour and finish may appear slightly different due to screen settings, lighting and production-batch variation. For one project, order the complete required quantity together to improve batch consistency.

Please inspect the package at delivery and report visible or transit damage within 48 hours. A continuous unboxing video showing the shipping label, sealed package and damaged panels is strongly recommended for faster verification.

Returns

Returns are not accepted for change of mind, incorrect colour or design selection, incorrect quantity calculation, or panels that have been cut, pasted, installed or used. Wrong, damaged or materially not-as-described products must be reported promptly and will be reviewed under the applicable damage and refund policy and consumer law.