3D PVC Panel #22 Fin Grey – full 50 × 50 cm panel

3D PVC Panel #22 Fin (Grey)

Name: 3D PVC Panel #22 Fin (Grey) - Home Sajawat
SKU: 22 Fin Grey
Price: 231.00 INR
Availability: InStock

₹231.00

(In stock)

3D PVC Panel Fin Grey is an interior-grade 50 × 50 cm 3D PVC decorative panel. One panel covers 0.25 m² (approximately 2.69 sq ft) and weighs approximately 300 g. It is suitable for interior walls and ceilings and is not recommended for wet areas or exterior use.

Price is per panel GST & standard shipping included Minimum order: 10 panels Factory box: 50 panels Normally dispatched in 24–48 working hours Adhesive & installation not included

In stock

Plan your order

Wall coverage & price calculator

Enter one wall’s measurements in feet. This product’s current per-panel price is already selected.

Selected design 3D PVC Panel #22 Fin (Grey) Current product

Enter wall width and height to calculate your requirement.

Wall area—

Panels before wastage—

Recommended order—

Estimated panel cost—

Each panel covers approximately 2.69 sq ft. Factory packing: 50 panels per box.

Estimate only. Please confirm site measurements, pattern alignment and cutting allowance before ordering. Adhesive and installation are not included.

Questions? Let's Chat

Category:3D PVC Panel

Description

3D PVC Panel Fin Grey is an interior-grade decorative panel for residential and commercial walls and ceilings.

Product specifications

Price: Per panel, including GST and standard shipping
Minimum order: 10 panels
Factory packing: 50 panels per box
Product type: 3D PVC panel
Base material: PVC
Panel size: 50 × 50 cm
Coverage: 0.25 m² (approximately 2.69 sq ft) per panel
Base sheet thickness: 1 mm
Embossed depth: Varies by design
Approximate net weight: 300 g per panel
Application: Interior walls and ceilings
Cleaning: Soft dry cloth only

Installation and surface preparation

Install on a clean, dry, stable and properly finished surface. The surface should have cured wall putty and primer and must be free from dust, moisture, oil, loose paint and flaking material.

Adhesive is not included and must be purchased separately. Fevicol SR 505 or a compatible nail-free/high-grab adhesive is commonly used. Follow the adhesive manufacturer’s instructions and test a small area before complete installation. Adhesive consumption is not specified because it varies by surface and application method.

Panels can be cut using a hard paper cutter or light saw with appropriate safety precautions. For ceiling installation, professional application and temporary support during adhesive setting are recommended. Home Sajawat does not provide installation service.

Use and care

This is an interior-grade product. It is not recommended for exterior locations, wet areas, direct water exposure or outdoor weather conditions. Clean only with a soft dry cloth.

No fire-retardant or heat-resistance certification is claimed. No separate commercial product warranty is provided.

Dispatch, colour and damage information

Orders are normally dispatched within 24–48 working hours. Delivery time after dispatch depends on the destination.

Product colour and finish may appear slightly different due to screen settings, lighting and production-batch variation. For one project, order the complete required quantity together to improve batch consistency.

Please inspect the package at delivery and report visible or transit damage within 48 hours. A continuous unboxing video showing the shipping label, sealed package and damaged panels is strongly recommended for faster verification.

Returns

Returns are not accepted for change of mind, incorrect colour or design selection, incorrect quantity calculation, or panels that have been cut, pasted, installed or used. Wrong, damaged or materially not-as-described products must be reported promptly and will be reviewed under the applicable damage and refund policy and consumer law.

Reviews (0)